Class 10 Science Chapter –  7 How do Organisms Reproduce? Questions and Answers New NCERT Updated Syllabus 

Class 10 Science Chapter –  7 How do Organisms Reproduce? Questions and Answers

Page no: 114

Question: 1. What is the importance of DNA copying in reproduction?

Answer: DNA copying is the most basic event in reproduction because:

  • DNA in the nucleus carries the information (blueprint) for making proteins, which determine body design.
  • Cells use chemical reactions to build copies of their DNA before dividing, so that new cells receive a complete copy of the body-design blueprint.
  • DNA copying ensures offspring look similar to their parents (heredity).
  • The copying process is not perfectly accurate, so subtle variations are introduced — these variations are the basis for evolution and help species survive changing conditions.

Question: 2. Why is variation beneficial to the species but not necessarily for the individual?

Answer:

  • Populations occupy well-defined niches in an ecosystem. If the niche changes drastically (e.g., temperature rises, water levels change), a population perfectly suited only to the old conditions could be wiped out.
  • Variations in DNA copies mean some individuals may be able to survive the new conditions — so variation helps ensure the survival of the species.
  • However, for a particular individual, a variation may not be useful (or may even be harmful), because the individual is already well suited to its current niche. Hence, variation benefits the species as a whole but is not necessarily beneficial to every individual.

Page 119

Question: 1. How does binary fission differ from multiple fission?

Answer :

Binary fissionMultiple fission
The organism divides into two equal daughter cellsThe organism divides into many daughter cells simultaneously
Seen in bacteria, Amoeba, LeishmaniaSeen in the malarial parasite, Plasmodium

Question: 2. How will an organism be benefited if it reproduces through spores?

Answer: 

1. Spores are covered by thick protective walls that help them survive unfavourable conditions until they contact a suitable moist surface.

2. Each spore can develop into a new individual, so a single organism can produce many offspring at once.

3. Spores are light and can spread easily to new places, helping the organism colonise new areas.

Question: 3. Can you think of reasons why more complex organisms cannot give rise to new individuals through regeneration?

Answer: 

1. Complex organisms have highly specialised tissues and organs organised at specific positions; body cells lose the ability to change into different cell types.

2. Regeneration is carried out by specialised cells that proliferate and differentiate — complex animals lack a simple body design in which every piece contains such cells.

3. Also, regrowing a whole complex body (with many organs) from a fragment would require an extremely organised sequence of development, which is not possible in complex multicellular bodies.

Question: 4. Why is vegetative propagation practised for growing some types of plants?

Answer: 

1. Plants can be raised quickly from parts like roots, stems and leaves without seeds.

2. The new plants are genetically identical to the parent, preserving desirable traits.

3. Seedless plants and plants with poor seed viability can be grown easily.

4. Using tissue culture (a modern method of vegetative propagation), many plants can be grown from one parent in disease-free conditions — commonly used for ornamental plants.

Question: 5. Why is DNA copying an essential part of the process of reproduction?

Answer: (Same idea as Q1 on page 114 — full answer above.)

  • DNA carries the hereditary information (blueprint of body design); copying ensures the new generation inherits this information and resembles the parents.
  • The copying also introduces slight variations, which are important for the survival of the species.

Page 126

Question: 1. How is the process of pollination different from fertilisation?

Answer:

  • Pollination: The transfer of pollen grains from the anther (stamen) to the stigma. It may be self-pollination (same flower) or cross-pollination (one flower to another, by wind, water or animals).
  • Fertilisation: The fusion of the male germ-cell from the pollen grain with the female gamete (egg) in the ovule, forming the zygote.
  • Thus, pollination is only the transfer of pollen; fertilisation is the actual fusion of gametes that follows it.

Question: 2. What is the role of the seminal vesicles and the prostate gland?

Answer:  Along the path of the vas deferens, these glands add their secretions to the sperms, so that:

  • The sperms are in a fluid that makes their transport easier, and
  • The fluid provides nutrition to the sperms.

Question: 3. What are the changes seen in girls at the time of puberty?

Answer: 

  • Increase in breast size, with darkening of the skin of the nipples at the tips of the breasts.
  • Girls begin to menstruate around this time.
  • Growth of thick hair in new parts of the body such as armpits and the genital area; thinner hair on legs and arms; skin becoming oily (possible pimples).
  • These changes occur slowly, over months and years, and vary from person to person.

Question: 4. How does the embryo get nourishment inside the mother’s body?

Answer:

  • The embryo gets nutrition from the mother’s blood through a special tissue called the placenta, a disc embedded in the uterine wall.
  • The placenta contains villi on the embryo’s side, surrounded by blood spaces on the mother’s side — this provides a large surface area for glucose and oxygen to pass from the mother to the embryo.
  • Waste substances produced by the embryo are also removed by transferring them into the mother’s blood through the placenta.

Question: 5. If a woman is using a copper-T, will it help in protecting her from sexually transmitted diseases?

Answer: No. The copper-T is placed in the uterus and works only as a contraceptive (preventing pregnancy). It does not provide protection against sexually transmitted diseases such as gonorrhoea, syphilis, warts, or HIV-AIDS. A barrier method like a condom helps to prevent transmission of such infections to some extent.


E X E R C I S E S Page no: 127

Question: 1. Asexual reproduction takes place through budding in 

(a) Amoeba. 

(b) Yeast. 

(c) Plasmodium. 

(d) Leishmania. 

Answer: (b) Yeast.

Explanation: Yeast reproduces asexually through a process called budding, where a small bud forms on the parent organism and eventually detaches to grow into a new individual.

Question: 2. Which of the following is not a part of the female reproductive system in human beings? 

(a) Ovary 

(b) Uterus

(c) Vas deferens

(d) Fallopian tube 

Answer: (c) Vas deferens.

Explanation: The vas deferens is part of the male reproductive system, responsible for transporting sperm. The female reproductive system includes the ovaries, uterus, and fallopian tubes.

Question: 3. The anther contains 

(a) sepals. 

(b) ovules.

(c) pistil. 

(d) pollen grains. 

Answer: (d) Pollen grains.

Explanation: The anther is the part of the stamen (male reproductive part of a flower) that produces and contains pollen grains, which are the male gametes in flowering plants.

Question: 4. What are the advantages of sexual reproduction over asexual reproduction? 

Answer: Advantages of Sexual Reproduction: – 

1. Genetic Variation:

– Sexual reproduction involves the combination of genetic material from two parents, leading to offspring with unique genetic combinations. This variation is crucial for the adaptability and survival of species in changing environments.

2. Survival of Species:

– The genetic diversity produced through sexual reproduction increases the chances that some individuals in a population will possess traits that allow them to survive environmental changes, diseases, or other challenges.

3. Evolutionary Potential:

– The introduction of new genetic combinations can lead to evolutionary changes over generations, allowing species to evolve and adapt to new conditions.

4. Elimination of Harmful Mutations:

– Sexual reproduction can help reduce the accumulation of harmful mutations in a population, as these mutations may not be passed on to the next generation if they do not contribute to reproductive success.

5. Enhanced Adaptability:

– Populations that reproduce sexually can adapt more quickly to new challenges, such as climate change or new predators, compared to those that reproduce asexually, which may be more uniform and less adaptable.

Question: 5. What are the functions performed by the testis in human beings? 

Answer: Functions of the Testis : – 

  1. Sperm Production:
    • The primary function of the testes is to produce sperm cells (spermatogenesis). This process occurs in the seminiferous tubules within the testes.
  2. Hormone Secretion:
    • The testes secrete male sex hormones, primarily testosterone, which is responsible for the development of male secondary sexual characteristics during puberty, such as increased muscle mass, deepening of the voice, and growth of facial hair.
  3. Temperature Regulation:
    • The testes are located in the scrotum, outside the abdominal cavity, to maintain a temperature slightly lower than the body temperature, which is essential for optimal sperm production and viability.
  4. Storage of Sperm:
    • The testes also play a role in the initial storage of sperm before they are transported through the reproductive tract.

Question: 6. Why does menstruation occur? 

Answer: Reasons for Menstruation:

  1. Preparation for Pregnancy:
    • Menstruation is part of the menstrual cycle, which prepares the uterus for a potential pregnancy. Each month, the lining of the uterus thickens to provide a nourishing environment for a fertilized egg.
  2. Lack of Fertilization:
    • If fertilization does not occur (i.e., if the egg is not fertilized by sperm), the thickened uterine lining is no longer needed. The body signals the breakdown of this lining.
  3. Shedding of the Uterine Lining:
    • The shedding of the uterine lining, along with blood and mucous, occurs through the vagina. This process is known as menstruation and typically lasts for about two to eight days.
  4. Hormonal Regulation:
    • Menstruation is regulated by hormones, including estrogen and progesterone. When hormone levels drop (due to the absence of pregnancy), the uterine lining is expelled.
  5. Cycle Continuation:
    • Menstruation marks the end of one menstrual cycle and the beginning of another, allowing the reproductive system to reset and prepare for the next potential cycle of ovulation and fertilization.

Question: 7. Draw a labelled diagram of the longitudinal section of a flower. 

Answer: A labelled diagram of a flower’s longitudinal section typically includes the following parts: 

1. Stamen: The male reproductive part, consisting of the anther (produces pollen) and filament.

2. Pistil: The female reproductive part, made up of the ovary (contains ovules), style, and stigma (receives pollen).

3. Petals: Attract pollinators.

4. Sepals: Protect the flower bud.
(Include a diagram with these labels for clarity.)

Question: 8. What are the different methods of contraception? 

Answer: Contraceptive methods include :– 

  • Mechanical Barriers: Such as condoms, which prevent sperm from reaching the egg.
  • Hormonal Methods: Oral contraceptive pills that regulate hormones to prevent ovulation.
  • Intrauterine Devices (IUDs): Like copper-T, placed in the uterus to prevent fertilization.
  • Surgical Methods: Such as tubal ligation in females or vasectomy in males to block reproductive pathways.

Question: 9. How are the modes for reproduction different in unicellular and multicellular organisms? 

Answer: Unicellular Organisms : –

  • Reproduction Method: Primarily reproduce asexually.
  • Common Modes:
    • Fission: This is the most common method where the organism divides into two or more equal parts. For example:
      • Binary Fission: Seen in organisms like Amoeba and Bacteria, where the cell splits into two identical cells.
      • Multiple Fission: In organisms like Plasmodium, the cell divides into many daughter cells simultaneously.
    • Budding: Some unicellular organisms like yeast reproduce by forming small buds that eventually detach and grow into new individuals.

Multicellular Organisms – 

  • Reproduction Method: Can reproduce both asexually and sexually.
  • Common Modes:
    • Asexual Reproduction:
      • Fragmentation: Organisms like Spirogyra can break into fragments, each of which can grow into a new individual.
      • Budding: In organisms like Hydra, buds form on the parent organism and develop into new individuals.
      • Vegetative Propagation: In plants, parts like roots, stems, or leaves can develop into new plants (e.g., sugarcane, roses).
    • Sexual Reproduction: Involves the fusion of male and female gametes, resulting in greater genetic variation. This is common in more complex organisms, including flowering plants and animals (e.g., humans).

Question: 10. How does reproduction help in providing stability to populations of species? 

Answer: Reproduction plays a crucial role in maintaining the stability of populations of species in several ways: –

  • Population Maintenance: Reproduction ensures that new individuals are produced to replace those that die, thus maintaining the population size. This is essential for the survival of a species.
  • Genetic Variation: Through processes like sexual reproduction, genetic variation is introduced within a population. This variation is vital for adaptation to changing environments and helps populations survive in the face of challenges such as diseases or climate changes.
  • Stability in Ecosystems: Stable populations contribute to the overall stability of ecosystems. When species reproduce successfully, they can occupy their ecological niches effectively, which supports the balance of the ecosystem.
  • Response to Environmental Changes: Populations with higher genetic diversity can adapt more readily to environmental changes. For instance, if a population of bacteria is exposed to a new antibiotic, some genetically varied individuals may survive and reproduce, leading to a population that can withstand the antibiotic

Question: 11. What could be the reasons for adopting contraceptive methods?

Answer: Adopting contraceptive methods can be influenced by various factors, including:

  • Family Planning: Couples may wish to control the number and timing of their children to ensure they can provide adequately for each child, both emotionally and financially.
  • Health Considerations: Some individuals may have health conditions that make pregnancy risky for the mother or the child. Contraceptives can help avoid such health complications.
  • Economic Factors: In many cases, families may choose to limit the number of children to improve their economic stability and quality of life. Fewer children can mean more resources available for each child.
  • Educational Goals: Individuals may want to complete their education or establish their careers before starting a family. Contraceptive methods allow them to postpone pregnancy.
  • Social and Cultural Factors: In some societies, there may be cultural or social pressures to limit family size or to space out pregnancies for various reasons, including maternal health.
  • Preventing Sexually Transmitted Infections (STIs): Certain contraceptive methods, such as condoms, also help reduce the risk of STIs, making them a dual-purpose option for many individuals.

Leave a Comment